Key Takeaways

  • The Bash for loop is a versatile tool that can work with numbers, words, arrays, command line variables, or the output of other commands.
  • Simple for loops can be used with numerical lists or word lists, allowing you to repeat a section of code for each value in the list.
  • The for loop can also be used with number ranges, filenames, command line parameters, word arrays, and associative arrays, providing flexibility in scripting tasks.


The versatile Bash for loop does much more than loop around a set number of times. We describe its many variants so you can use them successfully in your own Linux scripts.


The for Loop

All scripting and programming languages have some way of handling loops. A loop is a section of code that you want to have executed repeatedly. Rather than type the same set of instructions into your script, again and again, a loop will repeat one section of code over and over for you.

The Bash for loop is very flexible. It can work with numbers, words, arrays, command line variables, or the output of other commands. These are used in the header of the loop. The header dictates what the loop is working with—numbers or strings, for example—and what the end condition is that will stop the looping.

The body of the loop contains the code that you want to have repeated. It holds what you want the loop to do. The loop body can contain any valid script command.

A variable called the loop counter or iterator is used to step through a range of values or a list of data items. For each loop, the iterator takes on the value of the next number, string, or whatever data type the loop is iterating over. This allows the loop to work with the values of each of the data items in turn, or even in some cases to manipulate the data items themselves.

Simple for Loops

If you’re looking to write your first for loop, these simple examples will get you started.

for Loops using Numerical Lists

You can run a for loop on the command line. This command creates and executes a simple for loop. The iterator is a variable called i. We’re going to assign i to be each of the values in the list of numbers, in turn. The body of the loop is going to print that value to the terminal window. The condition that ends this loop is when i has iterated across the entire list of numbers.

for i in 1 2 3 4 5; do echo $i; done

a for loop counting from 1 to 5

It’s important to note here that the variable i is increased by one each time the loop spins round, but that’s because the list of numbers goes up by one each time.

This list of numbers starts at 3 and goes up in steps of two, then arbitrarily leaps to 44.

for i in 3 5 7 9 11 44; do echo $i; done

a for loop counting through a non-sequential list of numbers

It makes no difference to the for loop. It starts at one end of the list and uses each value in turn, until all the values in the list have been used.

Nor do the numbers need to be in ascending order. They can be in any order.

for i in 3 43 44 11 9; do echo $i; done

a for loop counting through an unsorted list of numbers

for Loops Using Word Lists

We can just as easily do the same with words. Copy the text of the script into an editor and save it as “word-list.sh.”

 #!/bin/bash
for word in This is a sequence of words
do
 echo $word
done

You’ll need to use chmod to make the script executable, and any other script you copy out of this article. Just substitute the name of the script each time you use the chmod command.

chmod +x word-list.sh

Making a script executable with chmod

Let’s run the script.

./word-list.sh

A for loop working through a list of words

Just as it did with the numbers, the iterator—in this example, the variable word—works its way through the list of data items until it reaches the end of the list. The loop body accesses the value in the word variable and so each word in the list gets processed.

for Loops with Number Ranges

If you wanted a for loop to run 100 times it would be a pretty tiresome affair to have to type in a sequence of 100 numbers in the loop header. Number ranges let you specify the first and last number only.

This script is “number-range.sh.”

 #!/bin/bash
for i in {1..10}
do
 echo "Loop spin:" $i
done

The number range is defined within curly brackets “{}” with two periods “..” separating the numbers that start and end the range. Make sure you don’t include any whitespace in the range definition.

This is how it runs:

./number-range.sh

A for loop using a number range

You can include another number that defines the step size the iterator should use to walk through the numbers in the range. This script, “number-range2.sh” will use a range of 0 to 32, and a step size of 4.

 #!/bin/bash
for i in {0..32..4}
do
 echo "Loop spin:" $i
done

The iterator steps through the number range in jumps of four.

./number-range2.sh

A for loop using an iterator step of 4

for Loops Using Filenames

Because we can process lists of words, we can get our scripts to work with filenames. This script is called “filenames.sh.”

 #!/bin/bash
for file in word-list.sh number-range.sh number-range2.sh filenames.sh
do
 ls -lh "$file"
done

It would be pretty pointless to have a script that only does what ls can do, but it does demonstrate how to access filenames inside the loop body.

./filenames.sh

A for loop using a list of filenames

In a similar way to using the number range, we can use a file pattern in the loop header to specify the files we want to process. This avoids a lot of typing and means we don’t need to know in advance the names of the files.

This script is called “filenames2.sh.” We’ve replaced the list of filenames with the filename pattern “*.sh” to have the script report on all script files in the current directory.

 #!/bin/bash
for file in *.sh
do
 ls -lh "$file"
done

Here’s the output.

./filenames2.sh

A for loop using a file pattern of *.sh

for Loops Using Command Line Parameters

We can add some more flexibility by passing in the filename pattern on the command line. The $* variable represents all of the command line parameters passed to the script.

This is “filenames3.sh.”

 #!/bin/bash
for file in $*
do
 ls -lh "$file"
done

We’ll ask for filenames that begin with “n” and have an SH extension.

./filenames3.sh n*.sh

A for loop taking a file pattern as a command line parameter

We can also pass in more than one pattern at a time.

./filenames3.sh n*.sh .bashrc

A for loop taking a file pattern and a filename s command line parameters

The iterator variable file takes on the value of each of the command line parameters. Filename patterns are expanded, and all of the filenames are processed in the loop body.

C-like for Loops

Bash supports the classic three-term for loop, such as those found in the C programming language. They’re called three-term for loops because there are three terms in the loop header.

  • The initial value of the loop iterator.
  • The test for whether the loop continues or ends.
  • The incrementing—or decrementing—of the iterator.

This script is “c-like.sh.”

The iterator I is set to 1 at the start of the loop, and the loop will run for as long as the statement ” i<=10 ” is true. As soon as i reaches 11, the for loop will stop. The iterator is being increased by one, every revolution of the loop.

 #!/bin/bashfor (( i=1; i<=10; i++ ))
do
 echo "Loop number:" $i
done

Let’s run this script.

./c-like.sh

A three-term or C-like for loop

The C-like for loop permits the easy creation of for loops that have slightly odd requirements. This loop starts at 15, and counts backward in steps of 3. This is “c-like2.sh”

 #!/bin/bash
for (( i=15; i>0; i-=3 ))
do
 echo "Loop number:" $i
done

When we run it, it should jump backward in steps of three.

./c-like2.sh

A C-like for loop counting backward

Infinite for Loops

You can also use this format of for loop to create an infinite loop. All you need do is remove all of the elements from the loop header, like this. This is “infinite.sh.”

 #!/bin/bash
for (( ; ; ))
do
 echo "Press Ctrl+C to stop..."
 sleep 1
done

You’ll need to hit Ctrl+C to stop the loop.

./infinite.sh

An infinite C-like for loop

for Loops Using Word Arrays

We can easily iterate through an array of words. We need to provide the name of the array in the loop header, and the iterator will walk through all entries in the array. This is “word-array.sh.”

 #!/bin/bash
distributions=("Ubuntu Fedora Manjaro Arch EndeavourOS Garuda")
for distro in $distributions
do
 echo $distro
done

All the distributions are listed for us.

./word-array.sh

A for loop using a word array

The continue Command

If you want the loop to step over a particular entry, test whether the iterator matches that entry and use the continue command. The continue command abandons the current spin of the loop. It increments the iterator and starts the next spin of the loop—assuming the entry you want to skip over isn’t the last item in the list.

This is “word-array2.sh.” It steps over the “Arch” array entry but processes all other array members.

 #!/bin/bash
distributions=("Ubuntu Fedora Manjaro Arch EndeavourOS Garuda")
for distro in $distributionsdo
 if [[ "$distro" == "Arch" ]] ;
   then
   continue
 fi
 echo $distro
done

“Arch” doesn’t appear in the terminal window.

./word-array2.sh

A for loop skipping an entry in a word array because of the continue command

The break Command

The break command breaks out of the loop and prevents any more processing.

This is “word-array3.sh.” It’s the same as the previous script with continue replaced by break.

 #!/bin/bash
distributions=("Ubuntu Fedora Manjaro Arch EndeavourOS Garuda")
for distro in $distributions
do
 if [[ "$distro" == "Arch" ]] ;
   then
   break
 fi
 echo $distro
done

When the iterator contains “Arch” the for loop abandons any more processing.


./word-array3.sh

A for loop abandong further processinmg because of the break command

for Loops Using Associative Arrays

In Bash 4 and higher, associative arrays allow you to create lists of key-value pairs that can be searched by the key or by the value. Because of the two-way relationship between the key and the value, they’re also called data dictionaries.

We can iterate through an associative array using a for loop. This script is “associative.sh.” It defines an associative array with four entries in it, one for each of “dog”, “cat”, “robin” , and “human.” These are the keys. The values are the (default) number of legs they each have.

 #!/bin/bash

declare -A animals=( [dog]=Four-legged [cat]=Four-legged [robin]=Two-legged [human]=Two-legged )

for legs in ${!animals[@]}
do
  if [ ${animals[$legs]} == "Two-legged" ]; then
    echo ${legs}
  fi
done

The iterator is called legs . Note that the loop header contains an “!” exclamation point. This is not acting as the logical NOT operator, it’s part of the associative array syntax. It is required to search through the array.

The body of the loop performs a string comparison test. If the value of the array member is “Two-legged”, it prints the key value to the terminal window. When we run it, the script prints the two-legged creatures.


./associative.sh

Using a for loop to extract items from an associative array

Iterating Over the output of Commands

If you have a command or sequence of commands that produce a list of something, such as filenames, you can iterate through them with a for loop. You need to watch out for unexpected filename expansions, but in simple cases it is fine.

This script is “command.sh.” it uses ls and wc to provide a sorted list of script file names, together with their line, word, and byte counts.

 #!/bin/bashfor i in $(ls *.sh | sort);do echo $(wc $i)done 

When we run it we get the statistics for each file, with the files listed in alphabetical order.

./command.sh

Using a for loop to iterate over the output of two piped commands

The Dazzling for Loop

The for loop is a versatile and easily understood scripting tool. But as flexible as it is, don’t forget that other loops exist for a reason. Don’t be dazzled into thinking the for loop is all you’ll ever need.

Related: How to Process a File Line by Line in a Linux Bash Script

The while loop, for example, is much better suited for certain things than the for loop, such as reading lines from a file.

Writing good scripts means using the most suitable tool for the task at hand. The for loop is a great tool to have in your toolbox of tricks.

Source link