Though it appears to be an older model remote from 2011, the SRP5004 model remote may still be in circulation for some users. Since the setup process is a bit different, we wanted to cover how to set it up both with and without a code properly.
If you have the code list:
- Manually turn on the device.
- Press and hold the button you want to assign on your Philips remote for 5 seconds. E.g. Press and hold “TV” to program your TV.
- If the LED light is on, setup mode is activated.
- Find the corresponding code and input it on the remote. If the LED turns off, the code was input incorrectly.
- Aim the remote at the device you’re pairing, and then press and hold the Power button.
- Once the device turns off, release the Power button.
- Press the Function button you are assigning twice to end setup.
If you don’t have the code list, repeat the steps above. At Step 4, input “9 – 9 – 9 – 9” instead of a designated code. The remote will automatically cycle through the entire database of available codes. Repeatedly pressing and holding the Power button until the device turns off. If it comes across one that works, it will power down the device. At that point, press the Function button to assign it and end setup.
